The SW-SFBA furnace soot blower is mainly used to remove dust and slagging on the water cooled wall of the boiler. Use a single nozzle to move forward and rotate at a fixed point for soot blowing. According to the nature of ash accumulation (or slagging) and the blowing requirements of different parts of the boiler, the blowing arc, number of blowing circles, and blowing pressure of the soot blower can be adjusted to achieve the optimal blowing effect.
Sopladores de hollín a vapor
Furnace Soot Blower
SW-SFBA
Detalles del producto
SW-SFBA
Especificaciones técnicas
- Soot blower stroke
- 267 mm (10.5 in)
- Travel speed of soot blower
- 290 mm/min
- Soot blower speed
- 2.3 rpm
- Each working time
- 2.76 minutes (1 cycle of blowing); 3.62 minutes (2 cycles of blowing); 4.49 minutes (3 cycles of blowing)
- Soot blowing medium
- superheated steam or compressed air
- Soot blowing pressure
- approximately 1.5 MPa
- Medium consumption
- approximately 30 kg (1 cycle of blowing); 60 kg (2 cycles of blowing); 90 kg (3 cycles of blowing)
- Number of nozzles
- 1
- Nozzle diameter
- 25.4 mm
- Rear inclination angle of nozzle
- 3°
- Effective blowing radius
- 1.5–2 m
- Motor model and related parameters
- YSR-6324 B5 type; 0.18 kW; approximately 1370 rpm; 380 V / 3 Ph / 50 Hz
- Weight
- approximately 110 kg