The SWD-4 furnace soot blower is mainly used to remove dust and slagging on the water cooled wall of the boiler. Use a single nozzle to move forward and rotate at a fixed point for soot blowing. According to the nature of ash accumulation (or slagging) and the blowing requirements of different parts of the boiler, the blowing arc, number of blowing circles, and blowing pressure of the soot blower can be adjusted to achieve the optimal blowing effect.
Steam Soot Blower
SWD-4 furnace soot blower
SWD-4
The SWD-4 furnace soot blower is mainly used to remove dust and slagging on the water cooled wall of the boiler.
ข้อมูลจำเพาะทางเทคนิค
- Soot blower stroke
- 267mm (10.5 ")
- Travel speed of soot blower
- 290mm/min
- Soot blower speed
- 2.3 rpm
- Each working time
- 2.76 minutes (1 cycle of blowing); 3.62 minutes (2 cycles of blowing); 4.49min (3 cycles of blowing)
- Soot blowing medium
- superheated steam or compressed air
- Soot blowing pressure
- ~1.5MPa
- Medium consumption
- ~30kg (1 cycle of blowing); ~60kg (2 cycles of blowing); ~90kg (3 cycles of blowing)
- Number of nozzles
- 1
- Nozzle diameter
- 25.4mm
- Rear inclination angle of nozzle
- 3 °
- Effective blowing radius
- 1.5~2m
- Motor model and related parameters
- YSR-6324 B5 type 0.18kw; ~1370 rpm. 380v 3P 50Hz
- Weight
- ~110kg