The SW-SFBB Furnace Soot Blower is primarily designed for removing ash deposits and slag buildup from boiler water walls. It uses a single-nozzle configuration that travels forward to the preset position and then performs rotary soot blowing at a fixed point. Depending on the characteristics of the deposits or slag, as well as the soot blowing requirements of different boiler sections, the blowing arc, number of rotations, and blowing pressure can all be adjusted to ensure optimum cleaning results.
Buharlı kurum üfleyiciler
Furnace Soot Blower
SW-SFBB
Ürün detayları
SW-SFBB
Teknik özellikler
- Soot blower stroke
- 267 mm (10.5 in)
- Travel speed of soot blower
- 290 mm/min
- Soot blower speed
- 2.3 rpm
- Each working time
- 2.76 minutes (1 cycle); 3.62 minutes (2 cycles); 4.49 minutes (3 cycles)
- Soot blowing medium
- Superheated steam or compressed air
- Soot blowing pressure
- approximately 1.5 MPa
- Medium consumption
- approximately 30 kg (1 cycle); 60 kg (2 cycles); 90 kg (3 cycles)
- Number of nozzles
- 1
- Nozzle diameter
- 25.4 mm
- Rear inclination angle of nozzle
- 3°
- Effective blowing radius
- 1.5–2 m
- Motor model and related parameters
- YSR-6324 B5 type; 0.18 kW; approximately 1370 rpm; 380 V / 3 Ph / 50 Hz
- Weight
- approximately 110 kg